mongodb启动参数

General options:
一般选项
  -h [ –help ]                show this usage information
                                   显示此用法信息
  –version                     show version information
                                    显示版本信息
  -f [ –config ] arg         configuration file specifying additional options
                                    参数配置文件中指定的其他选项
  -v [ –verbose ]            be more verbose (include multiple times for more verbosity e.g. -vvvvv)
                                    更详细的(包括多次获得更多的详细程度,比如 -vvvvv)
  –quiet                         quieter output
                                    安静输出
  –port arg                    specify port number
                                    参数指定的端口号
  –bind_ip arg                comma separated list of ip addresses to listen on – all local ips by default
                                    用逗号分隔的列表中的用于侦听的IP地址 – 默认情况下所有本地IP
  –maxConns arg            max number of simultaneous connections
                                     最大同时连接数
  –logpath arg                log file to send write to instead of stdout – has to be a file, not directory
                                     代替stdout的日志文件 – 是一个文件,而不是目录
  –logappend                  append to logpath instead of over-writing
                                     追加方式写入日志,而不是覆盖掉以前的
  –pidfilepath arg            full path to pidfile (if not set, no pidfile is created)
                                     pid文件的完整路径(如果没有设置,不创建pid文件)
  –keyFile arg                 private key for cluster authentication (only for replica sets)
                                     集群认证的私钥(仅对副本集有效)
  –unixSocketPrefix arg    alternative directory for UNIX domain sockets (defaults to /tmp)
                                     替代UNIX域套接字的目录(默认是/tmp目录)
  –fork                           fork server process
                                     创建一个服务器进程的方式启动
  –auth                           run with security
                                     安全模式下运行
  –cpu                            periodically show cpu and iowait utilization
                                     定期显示CPU和iowait利用率
  –dbpath arg                 directory for datafiles
                                      数据文件目录
  –diaglog arg                 0=off 1=W 2=R 3=both 7=W+some reads
  –directoryperdb             each database will be stored in a separate directory
                                     每个数据库将被存储在一个单独的目录
  –journal                       enable journaling
                                     允许调试
  –journalOptions arg      journal diagnostic options
                                     调试诊断选项
  –ipv6                           enable IPv6 support (disabled by default)
                                     启用IPv6的支持(默认情况下禁用)
  –jsonp                         allow JSONP access via http (has security implications)
                                     允许JSONP通过HTTP访问(有安全隐患)
  –noauth                       run without security
                                     非安全模式下运行
  –nohttpinterface           disable http interface
                                     禁用HTTP接口
  –noprealloc                  disable data file preallocation – will often hurt performance
                                     禁用数据文件的预分配 – 往往会损害性能
  –noscripting                 disable scripting engine
                                     禁用脚本引擎
  –notablescan                do not allow table scans
                                     不允许表扫描
  –nounixsocket              disable listening on unix sockets
                                     禁用监听Unix套接字
  –nssize arg (=16)         .ns file size (in MB) for new databases
                                     新的数据库的.ns文件的大小(单位:MB).
  –objcheck                    inspect client data for validity on receipt
                                     收到客户端的数据后的有效性检查
  –profile arg                  0=off 1=slow, 2=all
  –quota                         limits each database to a certain number of files (8 default)
                                     为每个数据库文件数量做限制(默认值8)
  –quotaFiles arg             number of files allower per db, requires –quota
                                      每个数据库文件限制的数量,需要–quota参数
  –rest                            turn on simple rest api
                                      打开其余简单的API
  –repair                         run repair on all dbs
                                      启动时修复所有数据库
  –repairpath arg             root directory for repair files – defaults to dbpath
                                      修复文件的根目录 – 默认取自–dbpath参数
  –slowms arg (=100)      value of slow for profile and console log
                                      到profile和终端的日志延迟毫秒数
  –smallfiles                    use a smaller default file size
                                      使用一个较小的默认文件大小
  –syncdelay arg (=60)     seconds between disk syncs (0=never, but not recommended)
                                      同步到磁盘的间隔秒数(默认:60秒)(0=从不,但不推荐)
  –sysinfo                        print some diagnostic system information
                                      打印一些诊断系统信息
  –upgrade                      upgrade db if needed
                                      升级DB,如果需要的话
Replication options:
复制选项
  –fastsync                      indicate that this instance is starting from a dbpath snapshot of the repl peer
                                      表明,这个实例是从一个REPL同行DBPATH快照开始
  –autoresync                  automatically resync if slave data is stale
                                      如果从结点的数据是陈旧的就自动重新同步
  –oplogSize arg              size limit (in MB) for op log
                                      操作日志的大小(单位:MB)
Master/slave options:
主/从选项
  –master                        master mode
                                       主模式
  –slave                           slave mode
                                       从模式
  –source arg                   when slave: specify master as <server:port>
                                       当为从结点时:指定主结点的位置<server:port>
  –only arg                       when slave: specify a single database to replicate
                                       当为从结点时:指定需要复制的数据库,不是全面都复制
  –slavedelay arg              specify delay (in seconds) to be used when applying master ops to slave
                                       指定从节点同步主节点oplog的延迟(单位:秒)
Replica set options:
副本设置的选项
  –replSet arg                   arg is <setname>[/<optionalseedhostlist>]
Sharding options:
分片选项
  –configsvr                      declare this is a config db of a cluster; default port 27019; default dir /data/configdb
                                       声明这是一个集群的配置服务器;默认端口 27019;默认目录 /data/configdb
  –shardsvr                      declare this is a shard db of a cluster; default port 27018
                                       声明这是一个集群的分片服务器;默认端口: 27018
  –noMoveParanoia           turn off paranoid saving of data for moveChunk.  this is on by default for now, but default will switch

本文固定链接: http://www.ccsbbs.com.cn/archives/6355.html | 极限手指

该日志由 极限手指 于2013年04月09日发表在 数据库 分类下, 你可以发表评论,并在保留原文地址及作者的情况下引用到你的网站或博客。
原创文章转载请注明: mongodb启动参数 | 极限手指

mongodb启动参数:等您坐沙发呢!

发表评论

您必须 [ 登录 ] 才能发表留言!